Kodiak Mountain Stone is proud to have sponsored the Junior Breakaway Roping in 2016 for the Southern Alberta Riding and Roping Circuit (S.A.R.R.C.)
Congratulations to Ben Mitchell from Pincher Creek on your 4th place finish!
Stop in at your Kodiak Mountain Stone show room in Lethbridge or Calgary AB to ask about our SPEC MIX Polymer Modified Stone Veneer Mortar.
Ultimate Bond. Non Sagging.
SPEC MIX® Polymer Modified Stone Veneer Mortar (PMSVM) is a technologically advanced adhered veneer mortar for use in bonding adhered manufactured stone veneer, natural thin cut stone and thin brick to a cementitious substrate. PMSVM is designed to provide excellent workability, cohesion, high bond strength, sag resistance, water resistance, efflorescence minimization, and durability. SPEC MIX PMSVM is the ideal solution for architects and contractors with projects where an immediate and ongoing need for mortar delivering high bond strength and sag resistance during installation is required. In applications where mortar joints are not utilized,such as dry stack applications, SPEC MIX PMSVM should be used to gain additional bond strength and “pop-off” protection. Installing natural thin cut stone veneer is aided by the unique anti-sag and high bond properties of SPEC MIX PMSVM.
In addition to custom mix designs that are available for specific applications or properties, the SPEC MIX Polymer Modified Stone Veneer Mortar is designed to be compatible with the characteristics of most all specified adhered masonry veneer units. It is acceptable for all types of construction: concrete, masonry, wood frame or steel studs, with submittals available upon request.
HIGH BOND STRENGTH
NON-SAG PERFORMANCE & REDUCED CRACKING
REDUCES POP-OFFS, CALL BACKS & REPAIRS
RESISTANCE TO WATER PENETRATION & EFFLORESCENCE
PRE BLENDED WITH SAND TO MINIMIZE LABOR & WASTE
CONSISTENT QUALITY CONTROL WITH EVERY BAG
GREAT WORKABILITY AND BOARD LIFE
Approximate Coverage Rates 80 LB. (36.3 KG) Bag:
- Scratch Coat: 20-23 Square Feet
- Bonding Coat: 24-26 Square Feet
- Joint Grout (1/2″ Joints): 38-40 Square Feet
- Full Installation (scratch, bond & joint): 13-15 Square Feet
*NOTE: coverage is approximate and will vary depending on workmanship, method of installation, substrate, style of stone, waste and regional variation.
- Contact your local SPEC MIX manufacturer
- Visit www.specmix.com
- Phone: 888-SPEC-MIX