Master Wall Acrylic Stucco Products from Kodiak Mountain Stone
Elasto-flex, Elastomeric Acrylic Coating, is a durable elastomeric architectural coating designed to bridge the minor cracking common in stucco applications. When dry it forms a stretchy rubber like film on the surface yet is vapor permeable.
Elasto-flex is available in all Master Wall® colors and custom colors delivered in five-gallon (19L) pails.
375-400 square feet (35-37 square meters) – single coat
*Coverages are estimated and vary
Weight: 53lbs (24 kg)
Working Time: Ready to use right from the pail after pre-mixing.
Drying Time: Varies by air temperature, humidity and surface temperature. Under normal room temperatures Elasto-flex will dry to the touch in 2-4 hours and is ready to recoat after 8 hours. Protect the finish from rain and temperatures less than 40F (5 C) for a minimum of 24 hours.
Application/Storage Temperatures: 40F (5C) to 110F (43C). Store out of direct sunlight.
Shelf Life: 2 years under normal conditions.
Job Conditions – Air and substrate temperature for application of Elasto-flex must be 50°F (10°C) or higher and must remain 50°F (10°C)or higher for a minimum of 24 hours. Provide temporary protection to protect the wall system from damage until permanent flashings, caps and sealants are installed. Store materials within prescribed temperature limits and out of direct sunlight. Working and drying times are based upon normal room temperature conditions and will vary with temperature and humidity.
Surface Preparation – Surface temperature must be above 50°F (10°C). Surface must be clean, dry, structurally sound and free of efflorescence, oil, grease, form release agents, and curing compounds. On previously painted surfaces, all loose, peeling and chalking paint must be removed. Any glossy areas must be sanded.
Concrete – Must have cured a minimum of 28 days prior to the application of Elasto-flex. If form release agents or curing compounds exist on the surface, they must be removed with an appropriate solution. Remove any residual solution by flushing with water.
Masony – Clean, cured, dry and unpainted.
Stucco – Must be cured, dry and unpainted. If additives were used in the stucco, it is recommended that a test patch be made to evaluate bond strength of the Elasto-flex to the stucco.
Masterwall EIFS – Clean and dry.
Priming – Prime new surfaces such as concrete, masonry and stucco with Master Wall Primecoat to equalize substrate absorption. Priming is not necessary over Master Wall Superior Finishes.
Mixing – Thoroughly stir Elasto-flex into a homogenous consistency. Small amounts of clean, potable water may be added to obtain a workable consistency. Do not over mix. Do not exceed 12 ounces (0.35L) of water per pail. Do not add accelerators or retarders to Elasto-flex.
Application – Elasto-flex can be applied by brush, roller, or airless spray equipment. When using a roller, a maximum ¾ nap is recommended. Apply Elasto-flex in an even, continuous coat, maintaining a wet edge of 20 mils wet for a dry thickness of 10 mils.
Clean Up -Tools and equipment can be cleaned with soapy water when Elasto-flex is wet.
Limitations – Do not use Elasto-flex as a finish directly over any Master Wall base coat.
Information contained in this product data sheet conforms to the standard detail recommendations and specifications for the installation of Master Wall® Inc. products and is presented in good faith. Master Wall Inc. assumes no liability, expressed or implied as to the architecture, engineering, or workmanship of any project. This information may be concurrent with, or superseded by other applicable documents, such as specifications and details. Contact Master Wall® Inc. for the most current product information.
2014 is proving to be a great year at Kodiak Mountain Stone. We have had a large variety of projects we’ve been involved in ranging from renovations to new home construction to some great commercial jobs. We are fortunate to be very diversified in our product offerings.
Manufactured Stone Veneer
Kodiak Mountain Stone
With our own line of manufactured stone veneer we have seen some beautiful projects. We have a wide range of stone profiles and colors that you can view HERE.
Kodiak Mountain Stone helps owners, builders, designers and architects create lasting beauty and value with their projects.
Veneerstone is another line of manufactured stone that we supply. Veneerstone is a beautiful product that is great to work with.
Veneerstone gives you the warmth and beauty of natural stone with several significant advantages. Veneerstone is just as durable and is much faster and easier to install than natural stone. These benefits, combined with a wide selection of stone styles and colors, make Veneerstone the perfect choice for your building or home.
A big announcement for Kodiak Mountain Stone in 2014 has been our new partnership with Eldorado Stone. We are now a supplier of Eldorado Stone products in our Lethbridge AB store.
For over 40 years, Eldorado Stone has demonstrated an undeniable passion for creating authentic products that not only elevate quality and design, but also attainability. Stone. Brick. Fireplace Surrounds. Outdoor Living. This has been a great addition to the Kodiak Mountain Stone product offering in Lethbridge.
Kodiak Mountain Stone distributes a wide variety of natural stone products for interior and exterior applications. The diversity of colors, shapes and texture that we offer means that we have the perfect natural stone available for any project. Working with quarries from around the world allows us to offer a huge selection of natural stone products.
Some of our main suppliers are: Natural Stone Veneer International, Slimrock, Glacier Stone Supply, Thunderstone Quarries and ErthCoverings.
Whether it’s a stone fireplace, the exterior of a home or a renovation, if you are looking for natural stone we have what you need.
General Shale Brick
Brick is definitely in high demand. From full brick to thin brick veneer the demand continues to grow in 2014. For more than 80 years, General Shale’s brick line has been the cornerstone of their success. With a multitude of colors, styles and textures to choose from, their brick portfolio has something to complement any style of home.
Cherokee Brick & Tile Company
The history of Cherokee Brick’s business is one of continuous change. They’ve challenged themselves to
adopt the newest improvements in technology in order to continuously provide distinctive products. From the original crude methods of making only one size and type of brick, their Company now manufactures over 100 different varieties.
Today, with its three modern plants and extensive product line, they can meet the needs of almost any consumer. Whether it is a new home, renovation project, or large commercial structure. Cherokee Brick strives to give its customers quality products and superior service.
Master Wall Acrylic Stucco Products
Master Wall®, Inc., manufactures Quality Stucco, Coatings and Exterior Insulation and Finish Systems (EIFS) for residential and commercial projects. Master Wall® is well positioned in the industry.
With Master Wall® you have the choice of standard and even custom colors. All our finishes feature DPR (Dirt Pickup Resistant) polymers and the regional choice of either marble or quartz aggregates.
RhinoRock Light Weight Concrete Fencing
DO IT ONCE, DO IT RIGHT….concrete fencing is now affordable. RhinoRock can meet all of your fencing needs whether it is residential, commercial or industrial. Now you don’t have to settle for constant plastic or wood fencing repairs! A Rhinorock patented concrete clad wall is affordable because it is produced with a unique manufacturing process that makes the fencing panel 90% lighter than a traditional heavy concrete fence.
Their light weight (concrete/foam) construction doesn’t sacrifice performance because it is manufactured with a high performance fiber reinforced concrete clad outer shell with a foam core. Concrete is the only material that can duplicate the realistic beauty of stone and provide the weatheribility that contractors demand. See our specifications page for more info on it’s construction and our Frequent Questions page has additional information.
Each project begins in your mind. If you don’t dream it, you can’t build it. At Kodiak Mountain Stone our goal is to help you finish the dream. We help you in the final steps to make your project beautiful. Contact our experts to help you find the perfect products for your project. Find our galleries online HERE. If you are renovating and need help visualizing your project, you can use our Kodiak Mountain Stone Visualizer. Find out more about our Visualizer HERE.
Calgary AB at 5432 56 Ave SE
Lethbridge AB 2620 2 Ave N
Springville UT 399 W 900 N